Roller maintenance skills

　　(1) Full gloss (100%): glass sand embossing roller

　　(2) Semi-gloss (50%): 50% glass + 50% gold steel sand embossing roller

　　(3) Dull (0%): gold steel sand (alumina sand) embossing roller

　　Due to the different resin materials used, and the difference in injection forming conditions, it is difficult to completely adjust its luster with a single sandblasting treatment, so it must be repeated many times.

　　To ensure the surface pattern of the embossing roller, it is usually necessary to carry out cleaning treatment on the embossing roller, such as pickling to remove rust, and using organic matter to remove oil to ensure that its surface is clean and pollution-free. Mechanical sandblasting is usually one of the most effective ways to improve it. The surface roughness of the embossing roller is increased by sandblasting, the surface area of the bonding interface is increased several times or even tens of times, and the binding force between the surface pattern and the embossing roller is improved accordingly. The surface roughness caused by sandblasting will increase the bonding strength of the embossing roller surface.

　　Also, the embossing roller should be kept dry to prevent rust again. Especially in summer, the moisture in the air will form a layer of water film on the surface of the treated roller, which will cause the embossing roller to rust. Usually the maintenance of the embossing roller is also very important, especially the surface pattern, should pay attention to timely cleaning, to prevent dirt blocking lines, cleaning, pay attention to the use of specific tools, do not use brute force, be careful to carefully clean in accordance with the direction of the pattern.

Read recommendations:

HF embossing machine price

HF embossing machine Factory

RF Polyester welder Manufacturing

high frequency Packing machine manufacture.What is the meaning, function, and installation of ultrasonic laminating machine?

Slitting and cross-cutting machine