TPU embossing machine maker.What is the correct operation method for the PP packaging belt production line of the embossing machine?

　　1. Before starting the PP packaging belt production line. Firstly, check whether the equipment and packaging belt are inserted correctly; Secondly, check if the power supply wire is damaged, then check if all moving parts are lubricated, and finally check if the packaging belt production line is fixed and not moving.

　　2. The operator of the PP packaging belt production line needs to be clear about the operation process. The operator of the packaging belt production line should have a basic understanding of the structure, working principles, operating procedures, and adjustment methods of the packaging belt mechanical equipment. Before operation, the power should be turned on, the packaging belt mechanical preheating should be allowed for a few minutes, and the length of the packaging belt should be adjusted. Of course, it is also necessary to listen to the packaging belt production line for any noise.

　　3. After the operation of the PP packaging belt production line is completed, it is important to remember to cut off the power supply and turn off the switch to prevent electric leakage and electric shock.

　　In addition to the necessary operational procedures for these three points, we also need to pay attention to the following items during the work process of the PP packaging belt production line:

　　1. Pay attention to controlling the temperature of the packaging belt production line barrel. The temperature from the feeding section to the homogenization section should gradually increase, and the temperature of the mold should be equal to or slightly lower than the maximum temperature of the packaging belt mechanical barrel.

　　2. When extruding and plasticizing the raw materials of the packaging belt, a porous plate and a filter screen should be added in front of the machine. The number of mesh and layers of the screen should be determined based on the working conditions of the raw materials and belt.

　　3. The strip blank of the PP packaging belt production line should enter the water tank perpendicular to the water surface.

　　4. If the strip blank is too wide, increase the distance between the mold and the liquid surface appropriately or increase the speed of the traction stretching roller.

　　5. If the width size of the strip blank is insufficient, the distance from the mold to the liquid level should be reduced or the speed of the traction stretching roller should be appropriately reduced.

　　6. If necessary, the speed of the screw can also be adjusted to change the extrusion amount of the molten material, so as to adjust the width of the packaging belt.

Read recommendations:

TPU welding machine Vendor

TPU embossing machine wholesale

HF Blister packing machine company

TPU embossing machine manufacture.What are the key points to pay attention to in the packaging belt production line of the embossing machine?

RF embossing machine price.How to improve the process level and efficiency of woodworking wrapping machines?