TPU embossing machine price.The leather embossing machine is a device for embossing leather

　　What is a leather embossing machine? As the name suggests, a leather embossing machine is a type of equipment used for embossing clothing, used for carving and embossing leather bags and handbags. Our company's automatic hydraulic flat embossing machine has an automatic feeding system, which can quickly and accurately point and improve work efficiency. So, how should we operate the leather embossing machine? At the same time, what are the characteristics of the automatic hydraulic flat embossing machine when used across the street, such as having a pressure retaining function, saving electricity and energy, extending the machine's service life, and improving the embossing effect?

　　1. First, turn on the three-phase power switch of the automatic hydraulic flat embossing machine, and then turn on the power switch on the control box on the side of the leather embossing machine. If there is a high cycle switch, do not turn it on temporarily. Then, turn on the electric heating power switch. At this time, the vacuum tube and the hot mold start to preheat.

　　2. The automatic oil pressure flat embossing machine adds insulation to the lower mold, and installs the upper mold at the upper end. Press the mold test switch to start debugging the joint position of the upper and lower molds. If the lower joint is poor, move the lower mold. If the level is not good, adjust the four pillars of the upper mold.

　　Embossing machine

　　3. After the mold of the leather embossing machine is adjusted, adjust the three time controllers (if it is a pedal type machine, there is only a high cycle welding time). The falling time is the time when the upper mold runs to press the lower mold, the welding time is the output time, and the cooling time is the curing time. The above three times need to be flexibly applied without a fixed number of values.

　　4. If the leather embossing machine is adjusted for the first time, it is necessary to adjust the spacing of the same tuning to the widest possible range.

　　5. If the above leather embossing machine has been operated for more than 10-15 minutes and the temperature has reached the required level, turn on the high cycle switch and start the operation test.

　　The automatic hydraulic flat embossing machine mainly uses an electronic heating controller to heat the upper and lower templates. It uses male and female molds to install on the heating working plate, and with a certain amount of pressure, the embossing can be completely achieved.

Read recommendations:

Bilateral feeding hydraulic cutting bed cutter

TPU embossing machine custom

RF embossing machine wholesale

Radio frequency embossing machine supplier.3000 ton steel and wood door embossing machine

Embossing machine vibration box function description