Ultrasonic embossing machine installation steps process

　　1. Remove the package, check the surface and parts of the equipment for signs of damage, check whether the screws are loose, whether the electrical connector is locked, and whether the accessories are complete.

　　2. The equipment should be placed on a flat hard surface, requiring the lace machine to be at least 0.5 meters away from the heat source, and ensuring that there is at least 1 meter before and after the lace machine, and at least 0.5 meters of space around it for operation.

　　3. Check the voltage requirements of the sign on the back of the vibration box, and ensure that the system is well grounded.

　　4. Connect the device to the power supply and air source. Turn off the power switch first. Note the voltage requirements of the machine: AC220V, 50-60Hz

　　5. The air pipeline is connected to a clean and lubricant-free compressed air source with a rated working pressure of 0.6MPa. Instructions for use

Read recommendations:

Melt cut split blister packaging machine

Automatic PVC bag making machine

Cutting machine

HF Leather welder.What are the main precautions of ultrasonic embossing machine

TR-band making